How to Replace the Plastic Strip on a Shower Door

Tagged As:

A door seal that was terrible typically causes A leaky shower door. Aging and wear causes the strip at the bottom of the doorway crack, to split or merely seal. Seals provide an inexpensive solution. Because these materials have a longer lifetime Even though these seals look like plastic, they are made of plastic or rubber. Strip necessary’s kind depends on your shower door’s design.

Inspect the bottom of the shower door to ascertain the plastic seal attachment method. Seals slide right into a channel at the bottom of the doorway or they’re placed between the doorway and the metal drip rail’s bottom.

Eliminate if needed for vinyl seal accessibility. The rail is connected to the door with little screws. To get seals, pull on the plastic strip from the rail channel. If needed, use needle-nose pliers to grasp the strip and pull it out.

Wipe bottom rail and the door channel using a cleaning rag to remove dirt and soap residue. Utilize an ammonia-based cleaner to cut through grime buildup. Wipe dry with a clean rag.

Remove from the seal, if applicable. Not all seals have adhesive.

Slide the seal using the pliers to pull it into place if needed. To the edge of the doorway using the plastic seal portion hanging underneath the doorway frame, stick the portion of the strip for those placed behind the drip rail.

Cut the seal span flush with the door’s edge . Put a bead of silicon caulk at the end of the strip to prevent moisture. Replace the drip rail.

See related